15 CONTROL OF VARIOUS DATA (DATA CONTROL)
15.9 Errors and Corrective Actions
217
15
15.9
Errors and Corrective Actions
Common to backup and restoration
Backup
Error
Cause
Corrective action
The backup data are not found.
The backup data are not stored in the SD card in
the GOT.
No SD card is installed to the drive specified for
storing the backup data.
• Install SD card with the backup data stored.
• Check the storage location for the backup data
with the utility.
The backup/restore cannot be executed because
the user does not know the password for the
backup/restore.
The user does not remember the password.
The password is incorrect.
• Check with the administrator of the system
regarding the password for the backup/restore.
• Execute the backup again by using a formatted
or new SD card.
The backup/restore cannot be completed because
a communication error occurs between the GOT
and a controller during the backup/restore.
The communication settings and communication
driver for the GOT are incorrectly set.
Check if the communication settings and
communication driver for the GOT are correctly
set.
Because parameters for the controller are
incorrectly set, the controller dose not recognize
the GOT.
Check if the parameters for the controller is
correctly set with tools, including GX Developer, for
the controller.
The controller is turned off.
Turn on the controller.
The cable is not correctly connected.
Check the cable.
Error
Cause
Corrective action
The backup data cannot be written into SD card.
No SD card is installed to the GOT.
Install a SD card to the drive specified for storing
the backup setting or backup data.
The SD card does not have free space.
Install a SD card with enough free space.
Delete unnecessary files in the SD card.
The SD card is set to write-protect.
Set the SD card to writable.
The attributes of backup data files stored in the SD
card cannot be changed with the GOT. Set the files
to writable with a personal computer.
The drive does not exist.
Check if the drive specified for storing the backup
setting or backup data exists. (Check if the SD card
is connected on the GOT.)
Setting data (files and data) cannot be obtained
from the controller.
The GOT cannot communicate with the controller.
Check the following.
GOT
• Check if the cable is correctly connected to the
GOT.
• Check if the correct communication driver is
installed on the GOT.
• Check if the communication settings are
correctly set.
Controller
• Check if the parameters are set.
• Check if the cable is correctly connected to the
controller.
• Check if the controller is turned on.
The backup cannot be executed because
passwords for files of the controller are set.
The user does not remember the password. The
password is incorrect. (The first backup)
Passwords for files of the controller are changed.
Check with the administrator of the system
regarding the passwords for files of the controller.
Summary of Contents for GOT SIMPLE Series
