Mitsubishi Electric FX5-DP-M, User Manual

Page: 92 / 176

90
8 PROFIBUS Configuration Tool
8.3 "PROFIBUS Network" window
■
Universal modules
When the module is not described in the GSD file, the module name is displayed as "Universal".
The following items can be set when the module displayed as "Universal" is double-clicked in "Project Slave Modules".
When the number of I/O points of the module displayed as "Universal" is set, check that the settings are made
properly referring to the following. If the settings are incorrect, the module may not operate properly.
Manual for the DP-Slave
Item Description Setting range
Consistency Selects the I/O data unit used for the data consistency function.
The data consistency function can be enabled in the "Master Settings" window.
For the "Master Settings" window, refer to the following.

Page 83 Master Settings
• Byte/Word: The data consistency is maintained in bytes or words.
• Complete: The data consistency of the entire I/O data of this module is maintained.

Input/Output Selects the I/O data type handled by the module.
• Inputs only: Handles input data.
• Outputs only: Handles output data.
• In- and Outputs: Handles input and output data.

Data Size Unit Selects the I/O data unit that is set with "Input Length" or "Output Length".

Input Length Sets the input data size.
This item can be set when "Inputs only" or "In- and Outputs" is selected in "Input/Output". 0 to 16 (Unit varies
depending on the "Data
Size Unit" setting.)
Output Length Sets the output data size.
This item can be set when "Outputs only" or "In- and Outputs" is selected in "Input/Output". 0 to 16 (Unit varies
depending on the "Data
Size Unit" setting.)