Mitsubishi Electric FX5-DP-M, User Manual

Page: 20 / 176

18
2 SPECIFICATIONS
2.1 General Specifications
2
SPECIFICATIONS
This section describes the specifications of FX5-DP-M.
2.1
General Specifications
General specifications other than the following are the same as the CPU module to be connected.
Refer to the following manual for general specifications.
 MELSEC iQ-F FX5U User's Manual (Hardware)

MELSEC iQ-F FX5UC User's Manual (Hardware)
2.2
Power Supply Specifications
Shows power supply specifications.
2.3
Performance Specifications
Shows performance specifications of FX5-DP-M.
*1 Transmission speed accuracy is within ± 0.2% (compliant with IEC61158-2).
Item Specifications
Dielectric withstand voltage 500 V AC for 1 minute Between all terminals and frame of communication
connector
Insulation resistance 10 M
Ω
or higher with 500 V DC
insulation resistance tester
Item Specifications
Internal power supply Power-supply voltage 24 V DC
Current consumption 150 mA
Item Description
PROFIBUS-DP station type DP-Master (Class 1)
Transmis
sion
specifica
tions Electrical standard and characteristics Compliant with EIA-RS485
Medium Shielded twisted pair cable (

Page 45 Wiring for PROFIBUS cable)
Network configuration Bus topology (or tree topology when repeaters are used)
Data link method • Between DP-Masters: Token passing
• Between DP-Master and DP-Slave: Polling
Encoding method NRZ
Transmission speed
*1
9.6 kbps, 19.2 kbps, 93.75 kbps, 187.5 kbps, 500 kbps, 1.5 Mbps, 3 Mbps, 6 Mbps, 12 Mbps
Transmission distance Differs depending on the transmission speed. (  Page 19 Transmission distance)
Max. No. of repeaters (Between DP-Master and
DP-Slave) 3 repeaters
No. of connectable modules (per segment) 32 per segment (including repeaters)
Max. No. of DP-Slaves 64 (

Page 40 Configuration of PROFIBUS-DP network)
No. of connectable nodes (No. of repeaters) 32, 62(1), 92(2), 122(3), 126(4)
Transmittable data Input data Max. of 2048 bytes (Max. of 244 bytes per DP-Slave)
Output data Max. of 2048 bytes (Max. of 244 bytes per DP-Slave)
No. of occupied I/O points 8 points
Applicable CPU module FX5U CPU module (Ver.1.110 or later)
FX5UC CPU module (Ver.1.110 or later)
Applicable engineering tool GX Works3 (Ver.1.050C or later )
PROFIBUS Configuration Tool (Ver.1.02C or later)
No. of connectable units 1 unit