Mitsubishi Electric FR-XC-11K, Instruction Manual

Page: 71 / 186

PU installation on converter
70
INSTALLATION AND WIRING
2.11
PU installation on converter
• When the PU (inverter operation panel or optional parameter unit) is installed on the multifunction regeneration converter,
the setting of converter parameters is possible by using the PU.
Use the option FR-CB2[ ] or the following connector and cable available on the market.
(To install the operation panel, the optional connector (FR-ADP) is also required.)
Securely insert one end of connection cable into the PU connector on the converter and the other end into the connection
connector on the parameter unit or the FR-ADP attached on the operation panel along the guides until the stoppers are
fixed.
NOTE
• Refer to the following table when fabricating the cable on the user side. Keep the total cable length within 20 m.
Commercially available products (as of February 2015)
Name Model Manufacturer
Communication cable
SGLPEV-T (Cat5e/300 m)
24AWG × 4P
Mitsubishi Cable Industries, Ltd.
RJ-45 connector 5-554720-3 Tyco Electronics
Parameter unit connection cable
(FR-CB2[ ]) (option)
Operation panel of
the inverter (FR-DU08) Parameter Unit
(FR-PU07) (option)
Operation panel connection
connector (FR-ADP) (option)