Mitsubishi Electric CRHV-P600YA-HPB, Service Handbook

Page: 81 / 170

[
VII
Control ]
- 74 -
HWE1312A GB
Step 4
Press the push
switch SWP3 to
save the change.
Press SWP3 once within one minute of changing the setting with SWP1 or SWP2 to save the
setting.
Once the new setting is saved, the display will stop blinking and stay lit. The display will, then,
return to the item code display mode.
If SWP3 is not pressed within one minute, the change will not be saved and the display will
return to the item code display mode.
Water temp.
Water temp.
setting C3
Water temp.
setting C1
Outside temp.
setting C4 Outside temp.
setting C2
Outside temp.
* Always use a value for setting C6 that is between setting value C2 and setting value C4, and for setting C5 between setting value
C1 and setting value C3.
Heating ECO (Curve)
Water temp.
setting C5
Outside temp.
setting C6