Mitsubishi Electric CITY MULTI CMB-WP1016V-GA1, Service Handbook

Page: 197 / 294

[
VIII
Troubleshooting ]
- 188 -
HWE1410A GB
7. Strainer
Operation procedures Illustrations
Operation
location
(1) Unscrew the four fixing screws from the
service panel on the right to remove it
(when servicing the strainer on the
Heating-main side water-pump).
(2) Unscrew the four fixing screws from the
service panel on the left to remove it
(when servicing the strainer on the Cool-
ing-main side water-pump).
In ceiling
space
(3) Unscrew the two screws on either side
of the control box. (Applicable to CMB-
WP108V-GA1 only)
(4) Slide the control box to the left until the
strainer is visible (Approx. 150 mm).
(Applicable to CMB-WP108V-GA1 only)
(5) Using the supplied spanner plate, open
the cover at the bottom of the strainer.
(6) Pull out the strainer downward, and re-
place it.
*Fully tighten the cover at the bottom of
the strainer. Failing to do so may cause
a water leakage.
Service panel (right) Service panel (left)
Slide the control box.
Supplied spanner plate
(1.6T)
Strainer
Control box
Strainer body
Strainer body
0000002394.book 188 ページ ２０１６年１月１２日 火曜日 午後４時４９分