Chapter 8 Network Address Translation (NAT)
71
8.4 The DMZ Screen
Click
Network Setting > NAT > DMZ
to open the
DMZ
screen. Use this screen to specify the IP
address of a default server to receive packets from ports not specified in the
Port Forwarding
screen.
Figure 50
Network Setting > NAT > DMZ
Table 41
Network Setting > NAT > DMZ
LABEL
DESCRIPTION
WAN Interface
Select the WAN interface for which to configure a default server.
Default Server
Address
Enter the IP address of the default server which receives packets from ports that are not
specified in the
Port Forwarding
screen.
Note: If you do not assign a default server, the Router discards all packets received for
ports not specified in the virtual server configuration.
8.5 The ALG Screen
Click
Network Setting > NAT > ALG
to open the
ALG
screen. Use this screen to enable and disable
the NAT Application Layer Gateway (ALG) in the Router.
Global End IP
This is the ending global IP address (IGA).
Mapping Set
Select the index number of the address mapping set.
Figure 49
NAT > Address Mapping: Edit (continued)
LABEL
DESCRIPTION
