Chapter 3 WAN
21
PPP
Authentication
Select an authentication protocol for outgoing calls:
AUTO
- Your Router accepts either CHAP or PAP when requested by this remote node.
CHAP
- Your Router accepts CHAP only.
PAP
- Your Router accepts PAP only.
VPI
The valid range for the VPI is 0 to 255. Enter the VPI assigned to you.
VCI
The valid range for the VCI is 32 to 65535 (0 to 31 is reserved for local management of ATM
traffic). Enter the VCI assigned to you.
IP Address
Obtain an IP
Address
Automatically
Select this option to use a dynamic IP address.
Static IP Address
Select this option if the ISP gave them a specific IP address to use.
IP Address
This option is available if you select
Router
in the
Mode
field and
IPv4
or
IPv4/IPv6
in the
IPv6/IPv4 Dual Stack
field.
Enter the IP address your ISP has assigned.
DNS Server
Dynamic
Select this option to use a dynamic DNS server.
Static
Select this option if the ISP gave them a specific DNS server to use.
Primary DNS
Enter the primary DNS server’s address for the Router.
Secondary DNS
Enter the secondary DNS server’s address for the Router.
IPv6 Address
Obtain an IP
Address
Automatically
Select this option to obtain an IPv6 address automatically.
DHCP IPv6
Select
DHCP
to obtain an IPv6 address from a DHCPv6 server. Select
SLAAC
to have the
Router use the prefix to automatically generate a unique IP address that does not need to be
maintained by a DHCP server.
DHCP PD
Select
Enable
to use DHCP PD (Prefix Delegation) to allow the Router to pass the IPv6 prefix
information to its LAN hosts. The hosts can then use the prefix to generate their IPv6
addresses.
Static IPv6
Address
If you select
Static IPv6 Address
, enter the IPv6 address and the address prefix length that
the Router uses.
IPv6 Address
Enter the IPv6 address assigned by your ISP.
Prefix length
Enter the address prefix length to specify how many most significant bits in an IPv6 address
compose the network address.
Table 4
Network Setting > WAN: ADSL: Edit (continued)
LABEL
DESCRIPTION
