Chapter 3 WAN
27
RIP Version
This field is not configurable if you select
None
in the
RIP Direction
field.
Select the RIP version from
RIP-1
and
RIP2-B
/
RIP2-M
.
Multicast
The Router supports
IGMP-v1
,
IGMP-v2
and
IGMP-v3
. Select
None
to disable it.
MLD Proxy
Select
MLD v1
or
MLD v2
to have the Router act as an MLD proxy on this connection. This
allows the Router to get subscription information and maintain a joined member list for each
multicast group. It can reduce multicast traffic significantly.
Select
None
to disable this feature.
PPPoE
Passthrough
his field is available when you select PPPoE encapsulation.
In addition to the Router’s built-in PPPoE client, you can select
Yes
to enable PPPoE pass
through to allow up to ten hosts on the LAN to use PPPoE client software on their computers
to connect to the ISP via the Router. Each host can have a separate account and a public WAN
IP address. PPPoE pass through is an alternative to NAT for application where NAT is not
appropriate.
Select
No
to disable PPPoE pass through if you do not need to allow hosts on the LAN to use
PPPoE client software on their computers to connect to the ISP.
MTU
MTU
Enter the MTU for this WAN interface in this field.
MRU
MRU
Enter the MRU (Maximum Receive Unit) for this WAN interface.
Table 5
Network Setting > WAN: VDSL: Edit (continued)
LABEL
DESCRIPTION
