Chapter 22 Remote Management
129
22.5 SNMP Screen
To change your Router’s SNMP settings, click
Maintenance > Remote MGMT
>
SNMP
tab. The
screen appears as shown.
Figure 94
Maintenance > Remote MGMT > SNMP
Table 78
Maintenance > Remote MGMT > SNMP
LABEL
DESCRIPTION
Server Port
This displays the port the SNMP agent listens on. If the number is grayed out, it is not
editable.
Server Access
Select the interfaces through which a computer may access the Router using this
service.
SNMPv3
Select Enable to activate the SNMPv3 feature.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to access the SNMP agent on the
Router.
Select
All
to allow any computer to access the SNMP agent.
Choose
Range
to just allow the computers with an IP address in the range that you
specify to access the Router using this service.
