5330e/5340e IP Phones – User Guide
2. If a password is required, dial your password (and press the
Enter
softkey if available).
3. Press
the
Read Message
softkey, and do one or all of the following:
To display the time the message was sent, press the
More Msg
softkey.
To display the number of the caller, press the
More Msg
softkey twice.
To call the message sender, press the
Call
softkey.
To delete the message, press the
Erase Msg
softkey.
To view the next message, press
(
MESSAGE
).
You can check for messages from a remote station:
1. Press
Superkey
(must be programmed to a key).
2. Press
the
No
softkey until "Remote Msging?" appears.
3. Press
the
Yes
softkey.
4. Dial your directory number.
5. Press
the
Enter
softkey.
6. If a password is required, enter your password and press the
Enter
softkey.
7. Press
the
Yes
softkey.
You can set, change, or clear a password (up to 7 digits, not including 0):
1. Press
Superkey
(must be programmed to a key).
2. Press
the
No
softkey until "Set Password?" appears.
3. Press
the
Yes
softkey.
4. Do one of the following:
To enter a new password, enter your password.
To change or clear your password, enter your current password.
5. Press
the
Enter
softkey.
6. To change or clear your password, do one of the following:
To change your password, enter your new password and press the
Enter
softkey.
To clear your password, enter
0
.
7. Enter your new password again.
8. If you are setting up or changing a password, press the
Enter
softkey.
9. Press
Superkey
(must be programmed to a key).
- 52 -
