5330e/5340e IP Phones – User Guide
USING YOUR PHONE WITH THE 5310 IP
CONFERENCE UNIT
Your phone uses the 5310 IP Conference Unit for conferencing. You use the Conference
Controller to turn the conference unit off or on, to adjust the volume or to put the conference
unit into Presentation mode. You can only run one Conference Controller session at a time. If
the 5310 Conference Unit is not connected to your phone, the
Conference Controlle
r
application is not available.
Access the Conference Controller
To access the Conference Controller:
1. Press the blue
Applications
key and press
Conference Unit
, or
2. Press the key programmed to the
Conference Unit
application.
Turn the Conference Unit On and Off
1. Verify that the conference unit is connected to your phone.
2. Access the Conference Controller. For more information, see
Access Conference
Controller
.
3. Press
Turn On/Turn Off
.
Note
: Turning the 5310 Conference Unit off will terminate the active call. To continue the
call either pick up the handset or press the
Speaker
key on the phone.
While the Conference Unit is on, the
icon shows in the phone status line.
Adjust the Conference Unit Volume
Press
Volume Up
or
Volume Down
.
Place the Conference Unit in Presentation Mode
Presentation Mode is used when only one individual is speaking to a group. If another
member in the group wishes to speak, you must disable Presentation Mode. Presentation
Mode minimizes extraneous noise.
To place the conference unit in Presentation mode
Press
Presentation Mode
.
- 67 -
