Mitel MiVoice 5340e User Manual Download Page 68

Page: 68 / 97

5330e/5340e IP Phones – User Guide

no mailbox associated with the phone’s primary DN, the mailbox status is displayed as
No Mailbox. In this case, see

Log into your mailbox from another extension

2. Enter your passcode.

3. Press

4. If you wish to have the system remember this passcode, press

Remember my

passcode

to enable the check box (



5. Press

Login

Note

: While you are logged into your mailbox, no indication of any new messages

arriving is provided until you log out and log in again.

Log Into Your Mailbox From Another Extension

To login to your mailbox from another extension:

1. Open the Voice mail application.

2. Press

Connect as guest

3. Enter your mailbox number.

4. Press

Enter Passcode

5. Enter your passcode.

6. Press

Login

Note

: If you wish to return to the owner login window, press

Connect

as owner at any

time.

Log Out Of Your Mailbox

To logout of your mailbox:



Press

Logout

. This closes the

Voice Mail

application.

Note

: After five minutes of inactivity, you are automatically logged out of your mailbox

and the Voice Mail application closes. When you close the Voice Mail application, you
are not automatically logged out of your mailbox.

- 60 -

Summary of Contents for MiVoice 5340e


































































































Search results

Summary of Contents for MiVoice 5340e

Reviews:

Related manuals for MiVoice 5340e

Brands by name

Popular brands

Mitel MiVoice 5340e, User Manual

Search results

Summary of Contents for MiVoice 5340e

Reviews:

Related manuals for MiVoice 5340e

Brands by name

Popular brands