Mitel MiVoice 5340e User Manual Download Page 82 | Manualshive

Page: 82 / 97

background image

5330e/5340e IP Phones – User Guide

only). Place the accessory on the charger and charge. The green LED starts to flash
indicating that the accessory is charging. It could take up to 60 minutes for the green
LED to start flashing. Allow the accessory to fully charge, approximately 3 hours.

4. Press

Yes

to confirm pairing. The Cordless Devices application confirms the pairing by

displaying the paired device name and its battery level indicator.

5. Press

Close

to exit.

Pairing a Bluetooth Accessory with a Bluetooth Module

Notes:



An IP phone can have one Bluetooth Handset and up to five Bluetooth headsets (or

up to six headsets if no handset is paired).



To pair a new Bluetooth Handset, you must first unpair the existing Bluetooth

Handset.



Pairing cannot be performed when a Bluetooth device is already in use.

To pair a Bluetooth accessory:

1. Ensure that the battery of the Bluetooth device to be paired is at least partially charged.

2. Press and hold the pairing button on the back of the Bluetooth Module for 5 seconds to

activate phone pairing mode. The LED on the Bluetooth Module blinks. The Cordless
Devices application opens on the phone and prompts you to place the accessory in
pairing mode.

3.

For Mitel Bluetooth Handsets:

Press and hold the hookswitch on the side of the

Bluetooth Handset (see page

77

) for 5 seconds to activate accessory pairing mode. The

LED on the handset blinks. The pairing confirmation window on the IP Phone appears,
displaying the product name for the device to be paired.

Note

: If the LED on the handset does not start to blink after 10 seconds, the

handset requires charging or is still in factory battery saving mode. Place the
handset on the charger. The green LED starts to flash indicating that the handset is
charging. It could take up to 60 minutes for the green LED to start flashing. Allow the
handset to fully charge, approximately 3 hours.

For third-party Bluetooth headsets:

Follow the manufacturer’s instructions to place the

Bluetooth headset in pairing mode. The pairing confirmation window on the IP Phone
appears, displaying the product name for the device to be paired.

4. Press

Yes

to confirm the pairing. The Cordless Devices application prompts you to enter

a passcode.

5. Enter a valid passcode for the Bluetooth device (default is 0000) using the keyboard on

the display, and press

OK

.

For third-party Bluetooth headsets:

An “Auto Connect” window displays. Press

Yes

if

the phone will not be shared with other users; press

No

if the phone will be shared with

other users and multiple headsets.

- 74 -

«
...
80
81
82
83
84
...
»

Summary of Contents for MiVoice 5340e


































































































Reviews:

No comments

Related manuals for MiVoice 5340e

Brand: Haier Pages: 24

Brand: Panasonic Pages: 5

Brand: Panasonic Pages: 312

Brand: Panasonic Pages: 311

Brand: Sagem Pages: 70

Aastra 9133i IP

Brand: ADTRAN Pages: 31

Brand: Grandstream Networks Pages: 56

Brand: Viking Pages: 25

Brand: Crestron Pages: 422

Brand: Avvio Pages: 46

Brand: Panasonic Pages: 6

Brand: Panasonic Pages: 13

Brand: Panasonic Pages: 214

Brand: CALLSWITCH Pages: 2

SILENO 50R FLIP

Brand: Majestic Pages: 75

Brand: Zte Pages: 33

Brand: Zte Pages: 74

Brand: LG Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands