35
Installing the NC-210/NC-211 Beacon
4.3.2 NC-211 Battery
The NC-211 Beacon contains a battery for supplementary operation. It is not a secondary
source of power.
4.3.3 Before Installing NC-211 for the First Time
Before you install NC-211, you must activate the battery.
To activate the NC-211 battery:
1. Carefully open the enclosure by removing the 4 screws and removing the back cover.
Figure 26 NC-211 (back view)
Attention: In order to comply with UL 2560, connect all power supplies for the
Beacons to a power-limited uninterruptible power source (UPS) for
back up power. The UPS will report AC loss troubles.
Refer to Appendix 2: UL 2560 Requirements for UPS (Uninterruptible
Power Supply) for more information about the UPS.
Attention: The beacon’s antenna is attached to the front cover. Be careful not to
damage the antenna wire when you open and close the enclosure.
!
!
Screws (x4)
Summary of Contents for MiCare NC-103
Page 2: ......