30
Installing the NC-2000 Patient Unit
To mount the Patient Unit:
1. Attach the mounting plate to the 3 gang PVC box using four screws (see Figure 23).
Figure 23 Patient Unit mounting plate
2. Attach the Patient Unit to the mounting plate.
3.10 LED Status Indicators
Table 4 Patient Unit LED Status Indicators
LED
Function
Top Left
Off:
The phone line is not enabled.
Red blinking:
The phone line is enabled but no phone is connected.
Steady green:
A phone is connected.
Top Right
Red blinking:
The Code Blue, Emergency, Staff Assist, Maintenance
or Custom Programming buttons are pressed.
Bottom Left
Green Blinking:
The Patient Unit has not joined the network.
Steady green:
The Nurse In button is pressed.
Red blinking for 10 seconds:
The Nurse Out button is pressed.
Bottom Right
Steady red:
There is a fault, for instance when the unit loses its
custom settings.
Mounting Holes
Summary of Contents for MiCare NC-103
Page 2: ......