31
Installing the NC-2000 Patient Unit
3.11 Maintenance and Service
Mircom recommends that each Patient Unit be tested on a weekly basis.
When performing service on a Patient Unit, disconnect power and all connections (inputs and
outputs) going to the unit before accessing any serviceable areas.
3.12 Restarting the Patient Unit
To restart the Patient Unit
•
Press the
Cancel
and
Nurse Out
buttons at the same time.
To reset the Patient Unit to factory default settings
•
Press the
Cancel
and
Staff Assist
buttons at the same time.
For information on the default settings, see LT-2075 MiCare Administrator’s Guide.
Summary of Contents for MiCare NC-103
Page 2: ......