15
Installing the NC-2100K Coordinator Bundle
7. Push the reset button for the coordinator with the blinking LED.
8. Confirm that the other coordinator beeps immediately, and that its green LED starts
blinking. This means it has started.
2.5
Mounting
Both models ship with 2 mounting brackets. Use the brackets to mount the Coordinator Bundle
to a wall or wooden shelf. Mount the Coordinator Bundle in a clear open area.
Figure 8
NC-2100K (1U model) mounted to a wall
Figure 9
NC-2100K (2U model) mounting holes
2.6
Maintenance and Service
Mircom recommends that each Coordinator Bundle be tested on a weekly basis.
When performing service on a Coordinator Bundle, disconnect the device from the Central
server, disconnect the USB cable, and then disconnect it from power before accessing any
serviceable areas.
Mounting holes
Mounting holes
Summary of Contents for MiCare NC-103
Page 2: ......