![background image](http://html1.mh-extra.com/html/mircom/fa-300-6l-series/fa-300-6l-series_installation-and-operation-manual_1805759045.webp)
FA-300-6L Installation and Operation Manual
39
Command Menu-->Panel Config
i3 Zones
This
i3 Zones
menu is used to program the process type for the initiating circuits. Select the zone to be an i3 zone,
otherwise the panel will treat the zone as a normal detection zone. Only six circuits will be shown for models FA-
300-6LD and FA-300-6L..
Note:
Refer to
How to Use the Keypad to Program the FA-300
on page 34 for detailed instructions on
making menu selections.
[ ] Zone-1 ->Default
-
-
-
-
[ ] Zone-6 ->Default
Use this function if i3 devices
are present on a zone. (See i3
devices section for details).
-i3 Detection Zones-
1 [ ] Zone-1
2 [ ] Zone-2
3 [ ] Zone-3
4 [ ] Zone-4
5 [ ] Zone-5
6 [ ] Zone-6