Configuration and CFG-300 LCD Service Tool
34
Pressing “LAMP TEST” at any time will show the information about the system and the software version as shown
below.
The first line shows the model number and panel type and the second line shows the software version number. The
version of the software is read as Major.Minor.Revision.
How to Use the Keypad to Program the FA-300
1. Press
(Menu button). You will be prompted to enter your password.
2. Enter your password, then press
(Enter button) to continue.
3. Select a Command Menu option by pressing
. The corresponding submenu will display.
4. Use the up and down arrow buttons to scroll through the submenu.
5. Press
to select a submenu option.
6. Use the left or right arrow buttons to select/unselect an option (selected = “X”). Use the up and down arrows to
scroll through the different menu options. When entering numerical data, use the up and down arrows to
increase or decrease the number.
7. Once you have made the correct selection, press
to confirm the change. The display will return to the
submenu screen.Press
(Cancel button) to return to the previous menu.
1. PANEL CONFIG (Command-Menu)
The following is a detailed description of the FA-300 configuration menu.
FA-300-6LD wUDACT
Version 0.0.4
M
X
-Panel Config-
1. Features
2. Inp. Zone
3. i3 Zones
4. Opt Zone
5. Correlation
6. Inp Zone Label
7. Opt Zone Label
8. Default Config