Configuration and CFG-300 LCD Service Tool
32
Configuration and CFG-300 LCD Service Tool
There are three methods of configuring the FA-300 LED Series Fire Alarm Panels:
1. Using the CFG-300 LCD Tool (see further documentation packaged with CFG-300 for configuration informa-
tion).
2. Using a PC or Lap Top Computer with a UIMA converter module.
3. Using a PC or laptop computer with remote connection (must use fire alarm with built-in UDACT).
The following information for configuring an FA-300 LED Series Fire Alarm Panel is based on using CFG-300 LCD
service tool for configuration.
To access configuration mode using a CFG-300 tool, connect the CFG-300 and then press the Menu button.
The CFG-300 LCD display will display the Main Menu. The function of different buttons on the front panel display is
shown in F
igure 20,
below.
Figure 20: FA-300 Configuration
SYSTEM
RESET
AC ON
X
M
?
GROUND FAULT
CPU FAIL
WALK TEST
COMMON ALARM
COMMON SUPV
REMOTE TROUBLE
COMMON TROUBLE
BATTERY TROUBLE
SIGNAL
SILENCE
AUXILIARY
DISCONNECT
LAMP
TEST
BUZZER
SILENCE
FIRE DRILL
NAC4
(ZONE4)
NAC3
(ZONE3)
NAC2
(ZONE 2)
NAC1
(ZONEV 1)
IAC6
(ZONE 1)
IAC5
(ZONE 5)
IAC4
(ZONE 4)
IAC3
(ZONE 3)
IAC2
(ZONE 2)
IAC1
(ZONE 1)
0
QZ
8
TUV
7
PRS
9
WXY
1
*
(left shift)
#
(right shift)
2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
This label
removed from
this location
represents the
alternate
functions of the
corresponding
buttons in
service mode