manualshive.com logo in svg

Miranda Xmedia Server, Configuration Manual, Page: 70 / 266

Share
Download
Miranda Xmedia Server Configuration Manual Download Page 70

XMS Configuration Guide

6-23

Replication of the XMS Server’s Database 

Verifying proper functioning of the servers and replication

When starting the Xmedia servers with replication enabled, it is recommended to first start 
the primary server followed by the secondary server. This ordering ensures that the primary 
server immediately becomes the live mode server. If the secondary server is started first, it 
will takeover live mode operation if the primary server does not start within the 

R

ECONNECT

 

T

IMEOUT

 value seconds. When the primary server finally does start up, it will force a failback 

operation.

Perform the following failover and failback tests to verify the proper functioning of the 
Xmedia Server replication:

Type of test

Instructions

1

Failover

Disconnect the network cable to the primary server. 

2

Failback

Reattach the network cable of the primary server.

3

Failover

Stop the primary Xmedia Server’s XMS service control.

4

Failback

Start the primary Xmedia Server’s XMS service control.

5

Failover

Terminate the primary Xmedia Server’s service control using a kill 
utility like PsKill (or similar).

6

Failback

The service control manager should auto-start the primary XMS.

7

Failover

Repeat all failover tests while saving assets between tests and 
verify integrity.

8

Failover

Repeat all failover test while working a MOS enabled rundown and 
verify the playlist’s integrity.

Summary of Contents for Xmedia Server











































































































































































































































































Reviews:

No comments