2-6
XMS Configuration Guide
XMS Hardware Overview
To install chassis rails and mount the Xmedia Server’s chassis into an equipment rack:
1.
Remove the Xmedia Server’s faceplate by pulling the faceplate’s handles away from
the chassis.
2.
Install the inner rail extensions to the server’s chassis.
a.
Place the inner rail extensions on the side of the chassis aligning the hooks of the
chassis with the rail extension holes. Be sure that the extension faces “outward”
just like the pre-attached inner rail.
b.
Slide the extension toward the front of the chassis.
c.
Secure the chassis with two screws as shown in figure
2-5
.
d.
Repeat steps 2A - 2C for the other inner rail extension.
Figure 2-5. Installing the inner rail extensions
3.
Install the outer rails to the rack (figure
2-6
).
a.
Attach the shorter outer bracket to the outside of the longer rail. You must align the
pins with the slides. Both bracket ends must face the same direction.
b.
Adjust the short and long brackets to the proper distance so that the rail fits snugly
with the rack.
c.
Secure the longer bracket to the front of the outer rail with two screws.
d.
Secure the shorter outer bracket to the rear side of the outer rail with three screws.
e.
Repeat steps 3A - 3D for the remaining outer rail.
Figure 2-6. Installing the outer chassis rails to the equipment rack
A
B