© Copyright
MINOS DIS TICARET LIMITED SIRKETI., 2020. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI.
Document No: T-MDR.2020_I.O.M./ Date: 09.01.2020
One of the most important things an operator can do for mini power harrow is
to make sure it is properly lubricated.
So a lubricant is a substance that reduces friction, heat, and wear when
introduced as a film between solid surfaces. Using the correct lubricant helps
maximize the life of your bearings and machinery, therefore saving money,
time, and manpower, thus making operations more efficient and more reliable.
The lubricating points show on the machine with label
(see fig. 21)
.
Figure 21-
The label of lubricating points
The rear roller's bearing housings are built with pre-lubricated sealed bearings.
Exposure to water or dust, however, require occasional relubrication with high
quality grease.
It is suggested to grease the bearings every
50 hours
, till to observe the first
oozing fat from the outer ring of the bearing, in order to prevent overfilling.
Always disengage the P.T.O. Shaft before lubricating the machine.
Take care to use organic based grease!
5.4.1- Gearbox Lubrication
Lubricant:
LUKOIL TRANSMISSION GL1-140
gear oil.
Check the oil level every
20 hours
, make sure that there is some oil on the
dipstick of the plug
(see fig. 22 B)
.
5.4- Lubrication
50