© Copyright
MINOS DIS TICARET LIMITED SIRKETI., 2020. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI.
Document No: T-MDR.2020_I.O.M./ Date: 09.01.2020
●
Link pins must fit the link-pin hole without excessive movement
.
If the
dimension of the pins is not corresponding to Category 2, contact the
manufacturer or the dealer to obtain the pins of right dimension.
● A bolt laying around the farm shop is not a substitute link pin! Link pins are
designed for specific lift arms loads and power ratings and must fit the lift
arm hole!
Follow these steps for attaching the machine to the tractor’s
universal three-point hitch:
● Make sure that tractor and machine are on a flat, stable and dry surface.
● Drive the tractor in reverse up to the machine placed in parked position, then
align the hydraulic lifting arms to the machine's lower hitches.
● Set the tractor's parking brake, stop engine, remove the ignition key and get
off the tractor.
● First attach the left draft arm
(see fig. 8 B)
of the tractor to the lower hitch of
the machine
(see fig. 7)
,
through the use of the related lower hitch pin and
safety split pin. Right draft arm
(see fig. 8 C)
is adjustable and is attached next.
Figure 8- Parts of the tractor 3-Point Hitch
● Remount and start the tractor to use the hydraulic system to raise the lift
arms
(see fig. 8 D, E)
if needed.
22