© Copyright
MINOS DIS TICARET LIMITED SIRKETI., 2020. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI.
Document No: T-MDR.2020_I.O.M./ Date: 09.01.2020
●
Check the lifting capacity and stability of the tractor connected to the
machine in transport position
(see section 3.1)
,
and apply to the tractor a
ballast of at least 20% of tractor and machine weight. Without ballast, the front
wheels of the tractor could lift up, resulting in loss of steering control and
braking. Ballast can be added to the front wheels or to the front of the tractor;
●
Lift the machine until the transport position (approx. 35-40 cm from the
ground), making sure the driveline transmission tubes does not hit either the
tractor or the machine gearbox. A minimum gap of 2 cm should be leaved
between the tubes and tractor and machine (see also section Driveline
installation).
Make sure PTO is disengaged and blades have stopped turning before raising
the machine to transport position.
Never leave the tractor unattended with the machine in the lifted position.
During transportation:
●
Always use caution and select a safe ground speed appropriate for the
terrain. Reduce speed when under adverse surface conditions, turning, or on
inclines. Take care that the machine does not strike obstacles such as trees,
fences or buildings;
●
Do not operate PTO. Always transport the machine with disengaged PTO;
●
Do not transport on steep slopes;
●
Do not transport equipment while under the influence of alcohol or drugs;
●
Do not use the machine to transport people, animals or things;
42