© Copyright
MINOS DIS TICARET LIMITED SIRKETI., 2020. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI.
Document No: T-MDR.2020_I.O.M./ Date: 09.01.2020
● When welding on the tractor or on machine which is mounted on the tractor,
disconnect the cable from battery and from generator!
● Perform maintenance operations always using appropriate Personal
Protective Equipment (protective eye glasses, hard hat, safety shoes, overall
and work gloves, filter mask).
● Store properly oils and greases.
Being sure bolts and nuts on mini power harrow are tight and properly torqued
is an important responsibility that machine owners and users need to be
familiar with and practise.
The first few hours after the first run in check the tightness of bolts and nuts,
tighten them if needed.
Control the bolts and nuts regularly to see if they are tightened enough. (Check
up approx.
every 50 hours
.)
Figure 18- Size of coil (A)
A
Ø
8.8
10.9
12.9
A
Ø
8.8 10.9 12.9
(
)
(
)
M 4
3,0
4,4
5,1
M 16
210 310 365
M 5
5,9
8,7
10
M 16x1,5
225 330 390
M 6
10
15
18
M 20
425 610 710
M 8
25
36
43
M 24
730 1050 1220
5.1- Checking The Tightness of Bolts and Nuts
46