Minolta PAGEPRO EX Manual Download Page 198

Page: 198 / 247

Problems During the Data Transfer and Print Cycle

8-15

oubl

eshoot

apter

19. After clearing the misfeed,

secure the drum unit into
place by applying pressure at
its top where the “

Press

”

label is affixed. The drum
unit will lock into place when
it has been correctly inserted
into the printer.

Note

20. Gently close the front cover.

Do not slam the front cover
to avoid causing damage to
the printer.

21. Make sure that the front

cover is completely closed.

You will hear the sound of the
printer operating. The printer
returns to the READY mode.

• Before shutting the printer’s exterior cover, make sure that the drum

unit is securely installed by applying pressure at its top where the
“

Press

” label is affixed.

Drum unit

NG (UNLOCKED)

OK (LOCKED)

Front cover lock release lever

Summary of Contents for PAGEPRO EX
























































































































































































































































Search results

Summary of Contents for PAGEPRO EX

Reviews:

Related manuals for PAGEPRO EX

Brands by name

Popular brands

Minolta PAGEPRO EX, Manual

Search results

Summary of Contents for PAGEPRO EX

Reviews:

Related manuals for PAGEPRO EX

Brands by name

Popular brands