Minolta PAGEPRO EX Manual Download Page 147

Page: 147 / 247

Changing Cartridges

7-8

rin

Chapt

16. Once the toner cartridge has

been installed, secure the
drum unit into place by
applying pressure at its top
where the “

Press

” label is

affixed. The drum unit will
lock into place when it has
been correctly inserted into
the printer.

Note

17. Gently close the front cover.

Do not slam the front cover
to avoid causing damage to
the printer.

18. Make sure that the front

cover is completely closed.

You will hear the sound of the
printer operating.

• Before shutting the printer’s exterior cover, make sure that the drum

unit is securely installed by applying pressure at its top where the
“

Press

” label is affixed.

Drum unit

NG (UNLOCKED)

OK (LOCKED)

Front cover lock release lever

Summary of Contents for PAGEPRO EX
























































































































































































































































Search results

Summary of Contents for PAGEPRO EX

Reviews:

Related manuals for PAGEPRO EX

Brands by name

Popular brands

Minolta PAGEPRO EX, Manual

Search results

Summary of Contents for PAGEPRO EX

Reviews:

Related manuals for PAGEPRO EX

Brands by name

Popular brands