Minolta PAGEPRO EX Manual Download Page 182

Page: 182 / 247

Cleaning the Printer

7-43

rin

Chapt

Before closing the front
cover, secure the drum unit
into place by applying
pressure at its top where the
“

Press

” label is affixed. The

drum unit will lock into
place when it has been
correctly inserted into the
printer.

Note

Gently close the front cover.
Do not slam the front cover
to avoid causing damage to
the printer.

Make sure that the front
cover is completely closed.

You will hear the sound of the
printer operating. The printer
returns to the READY mode.

• Before shutting the printer’s exterior cover, make sure that the drum

unit is securely installed by applying pressure at its top where the
“

Press

” label is affixed.

Front cover

NG (UNLOCKED)

OK (LOCKED)

Front cover lock release lever

Summary of Contents for PAGEPRO EX
























































































































































































































































Search results

Summary of Contents for PAGEPRO EX

Reviews:

Related manuals for PAGEPRO EX

Brands by name

Popular brands

Minolta PAGEPRO EX, Manual

Search results

Summary of Contents for PAGEPRO EX

Reviews:

Related manuals for PAGEPRO EX

Brands by name

Popular brands