Minolta PAGEPRO EX Manual Download Page 188

Page: 188 / 247

Problems During the Data Transfer and Print Cycle

8-5

oubl

eshoot

apter

Symptom

Cause

Action

A paper misfeed.

Possible causes
include:
• Paper does not meet

specifications
required.

• Paper is not loaded

properly in the tray.

• Transparencies have

not been fanned
thoroughly before
loading.

• The optional third

cassette unit is not
installed properly.

• The fusing unit

requires replace-
ment.

Once you have identi-
fied the cause of the
problem, use the cor-
responding reference
pages listed below and
follow the instructions
provided.
• For the types of

paper that can be
used,

☞

p. 2-17

• Reload the paper/

transparencies.

☞

pp. 2-21, 2-31

• To clear a paper

misfeed,

☞

p. 8-9

• Reinstall the third

cassette unit.

☞

“

Set-up Guide”

• Change the fusing

unit.

☞

p. 7-25

Double feed.

Sheets of the paper
stack are stuck
together.

Fan the paper stack
thoroughly and reload
it.

Summary of Contents for PAGEPRO EX
























































































































































































































































Search results

Summary of Contents for PAGEPRO EX

Reviews:

Related manuals for PAGEPRO EX

Brands by name

Popular brands

Minolta PAGEPRO EX, Manual

Search results

Summary of Contents for PAGEPRO EX

Reviews:

Related manuals for PAGEPRO EX

Brands by name

Popular brands