Minolta Magicolor 2200, User Manual

Page: 133 / 200

Status, Error, and Service Messages 125
MEDIA JAM TRANSFER
Transfer jams occur in the trans-
fer roller area. This type of jam
means that the media did not
make it to the paper exit area. Locate and remove the
jam.
MEDIA JAM UPPER TRAY
Media has jammed while being
pulled from the specified tray.
MEDIA MISMATCH
The media detected in the tray
doesn’t match the media size
setting. Change the media in the
tray or change the
media size setting.
PROCESSING
The printer is actively process-
ing jobs. No action needed.
PUT < X> IN INPUT <Y>
The
< X>
specified media is not
in the input tray
< Y>
.
Refill the tray with the
specified type media.
PUT < SIZE> PAPER IN <BIN>
Engine/Chain Inputbins is set to
Off and the displayed tray is
empty. Refill it with the specified
size media. <
SIZE>
is the
media size detected by the
engine, and <
BIN>
is the empty
tray.
Refill the tray with the
specified size media.
PUT < TYPE MEDIA> IN INPUT
BIN
Engine/Chain Inputbins is set to
On and a chained tray is empty. Refill the tray with the
specified type media.
REMOVE PAPER FROM
MAILBIN < X>
The mailbin identified by
< X>
is
full.
Remove the paper from
the identified mailbin.
REPLACE < X>
The specified item
< X>
needs to
be replaced, such as the OPC
drum.
Replace the specified
item.
WARMING UP
The printer is warming up. Wait. No other action
needed.
This message... means... Do this...