Minolta Magicolor 2200, User Manual

Page: 158 / 200

BuzzBox 150
5
Use the adhesive-backed clips provided to mount the BuzzBox where the printer
operator can see and/or hear it.
A 14-foot (4.2 m) cable is provided, but you can use up to a 500-foot cable (RJ-11
4-pin or 6-pin).
6
Connect the interface box to an electrical outlet.
A 110/220-volt adaptor is provided in the US, and a universal power supply is pro-
vided outside the US.
7
If you unplugged a parallel cable from the printer in step 1, attach the cable to the
parallel port on the interface box.
8
To test the BuzzBox, make sure its switches are on, then press the printer’s Online
key to take the printer off line.
You can use the BuzzBox switches to enable or disable the buzzer, the light, or both.
When the printer goes off line, the light flashes and the buzzer sounds until the
printer is placed back on line or until the light and buzzer switches are turned off.
Using BuzzBox
When the BuzzBox lights or buzzes, check the printer message window to find out
what has interrupted printing. See “Status and Error Messages” on page 122 for a list
of printer messages and how to respond to them.
Remember that pressing the Online key to enter the printer configuration menu trig-
gers the BuzzBox alarm.