Minolta Magicolor 2200, User Manual

Page: 179 / 200

Repacking the Printer 171
Remove the Waste Toner Pack
1
With the printer’s front cover open, remove the waste toner pack from
the printer.
2
Use the three plugs on the side of the waste toner pack to seal the opening.
3
Store it in its original packaging.
Remove OPC Drum Cartridge
Remove the OPC drum cartridge and store it in its original packaging.
Remove Transfer Belt
1
Remove the transfer belt and store it in a plastic bag in a box to avoid toner spillage
2
Close the printer’s front cover.
Remove the Duplex Unit
If you don’t have a duplex unit installed, skip to the next section.
1
Open the duplex cover and unhook the spring wire.
2
Loosen the two thumbscrews until the duplexer moves freely away from the right
side of the printer.
3
Lift duplex unit up and away from the printer.
4
Install the original right-side cover that came with the printer.
5
Repack the duplex unit in its original shipping carton for storage or shipment.
If you’re returning the printer for service, you don’t need to return the
duplex unit, unless the problem is with the duplex unit.
Remove the 5-bin Mailbox
If you don’t have a 5-bin mailbox installed, skip to the next section.
1
Remove the power cable.
2
Remove the side plates and loosen the thumbscrews.
3
Lift 5-bin mailbox up and away from the printer.