Minolta MAGICOLOR 2, Manual

Page: 56 / 188

Cleaning the
Printer
QMS magicolor 2 Op eration 5-6
4 Clean the transfer roller.
a Remove the transfer roller
unit by lifting the lock lever at
the right end of the transfer
roller unit until the unit is
freed, and then lifting the
unit out.
» Note: Because you cannot
see when the unit is
released, it’s best to lift the
unit and the lock lever at the
same time.
b Using a dry cotton cloth, clean any paper dust and toner
buildup from the transfer roller.
» Note:
Manually rotate the roller while cleaning it.
c Reinstall the transfer roller in the transfer unit.
5 Clean the paper discharger.
a Remove the paper
discharger by pushing it to
the right and then lifting it up
and out of the transfer unit.
(It comes out after the tabs
on the charger have cleared
their retainers.)
b Using a dry cotton cloth,
clean any paper dust and
toner buildup from the
outside of the paper
discharger.
c Using a dry cotton swab, clean any paper dust and toner
buildup from the interior of the paper discharger.
Lock Lever
Transfer Roller