Minolta MAGICOLOR 2 Manual Download Page 172

Page: 172 / 188

Introduction

QMS magicolor 2 Operation

B-2

Introduction

Use this chapter as a quick reference for understanding and navigat-
ing the printer’s configuration menu. The following menu charts are
provided:

Administration menu on page B-3

Installation menu on page B-9

Operator Control menu on page B-9

Note:

The Copier Menu is displayed in chapter 7, “CrownCopy,” of the

Options

manual.

Menu Chart Conventions

The following conventions are used in the menu charts:

Some menu choices are marked as optional or with a w/

item,

indicating that the selection appears in the menu only when the
option is installed.

These charts show only the top-level menus. See chapter 4,
“Printer Configuration,” in the

Reference manual for detailed infor-

mation on menu options.

Summary of Contents for MAGICOLOR 2





























































































































































































Search results

Summary of Contents for MAGICOLOR 2

Reviews:

Related manuals for MAGICOLOR 2

Brands by name

Popular brands

Minolta MAGICOLOR 2, Manual

Search results

Summary of Contents for MAGICOLOR 2

Reviews:

Related manuals for MAGICOLOR 2

Brands by name

Popular brands