Minolta MAGICOLOR 2, Manual

Page: 53 / 188

Cleaning the
Printer
5-3 Printer Care
n
Do not touch the electrical contacts, gears, or laser beam
devices. Doing so may damage the printer and cause the print
quality to deteriorate.
n
Keep media in the output tray at minimum level. If the media
stacks too high, your printer may experience media jams and
excessive media curl.
n
Lift the printer from the bottom only, using the carrying grips
under each side corner. Make sure two people are available to lift
the printer when moving it.
n
Keep the following in mind when storing the printer for an
extended period:
— Unplug the printer.
— Remove the toner and OPC belt cartridges from inside the
printer. After removing the cartridges, return them to their
original packaging. If the original packaging is not available,
protect the toner cartridges from spilling toner, and protect
the OPC belt cartridge from damage and light.
— See appendix B, “Technical Specifications,” in the Reference
manual for storage specifications.
Cleaning the Printer
Paper dust may accumulate inside the printer. This could affect the
printer’s performance. To prevent any potential problems associated
with this, you should clean your printer on a regular basis. You need
to clean both the inside and outside of the printer.
M
WARNING! Turn off the printer, unplug the power cord, and
disconnect all interface cables before cleaning.
ACHTUNG! Ziehen Sie den Netzstecker aus der Steckdose bevor
Sie den Drucker reinigen.