Minolta MAGICOLOR 2, Manual

Page: 121 / 188

Status and
Service Messages
8-11 Troubleshooting Printer Problems
Service Messages
This service message... Means...
CALL FOR SERVICE C3 NVRAM ERROR
An error has been detected
with the item indicated in the
service message. Correction
of these errors is performed
by qualified QMS service
personnel only. Contact your
QMS vendor.
» Note: A service message
sometimes occurs as a
result of an unusual
combination of events, not
because of an actual
problem. When the printer
stops and a service
message displays in the
message window, turn the
printer off and then back
on. This often clears the
service message indicator,
and printer operation
resumes. Always try this
before making a service
call.
Service calls should be placed
to the vendor from whom you
purchased the printer. If you
cannot get service from your
vendor, see appendix A,
“QMS Customer Support,” for
more information.
CALL FOR SERVICE C4 ENG CTRLR HW
CALL FOR SERVICE C7 TIMING CLOCK
CALL FOR SERVICE D1 Y CLUTCH
CALL FOR SERVICE D2 M CLUTCH
CALL FOR SERVICE D3 C CLUTCH
CALL FOR SERVICE D4 K CLUTCH
CALL FOR SERVICE D5 YK SOLND
CALL FOR SERVICE D6 MC SOLND
CALL FOR SERVICE E1 DEVLPR MOTOR
CALL FOR SERVICE E2 MAIN MOTOR
CALL FOR SERVICE E3 DRUM ERROR
CALL FOR SERVICE E4 TONER SENSOR
CALL FOR SERVICE E5 ROLLER SOLND
CALL FOR SERVICE E6 CLEAN SOLND
CALL FOR SERVICE E7 CLEAN CLUTCH
CALL FOR SERVICE E8 FUSER CLUTCH
CALL FOR SERVICE E9 BELT MARKER
CALL FOR SERVICE EL ERASE LED
CALL FOR SERVICE F0 COOLING FAN
CALL FOR SERVICE F2 OZONE FAN