Output Problems
QMS magicolor 2 Op
eration
8-26
Blank Pages
If a blank start-up page ejects or blank pages come out during a print-
ing job, try the following:
1
Check the toner cartridges.
The image does not print if the cartridges are empty.
2
If the toner cartridges are not empty and blank pages are
ejecting, take each cartridge out, rock it from side to side,
and reinstall it in the printer.
3
If these solutions do not work, contact your QMS vendor to
purchase another toner cartridge.
Not All Pages Print
If the printer stops printing in the middle of your file, try the following:
1
Check your cable.
You could have the wrong kind of cable, or your printer may not
be configured for the correct cable and port.
2
Make sure no one pressed the Cancel key while your job was
printing.
3
Check the message window to see if the cassette you are
using is out of media.
Summary of Contents for MAGICOLOR 2
