Introduction
QMS magicolor 2 Op
eration
7-2
Introduction
This chapter explains automatic jam recovery, discusses how to pre-
vent media jams, and then provides detailed information on how to
find and remove media jams.
Automatic Jam Recovery
The QMS
magicolor 2 Print System provides automatic jam recovery
(when enabled through the Administration/Engine/Page Recovery
menu). After you remove any jammed media, printing automatically
resumes from the page the printer stopped at when the jam occurred.
»
Note:
For automatic jam recovery to work, it is necessary to leave the
printer turned on when you remove the jammed media. After the jam
is cleared, open and close the top door before printing. Printing will
not resume until you do this.
Preventing Media Jams
There are several things you can do to reduce the occurrence of
media jams.
n
Use paper, envelopes, labels, and transparencies that match the
printer specifications.
n
Make sure the media is not folded, wrinkled, or excessively curled.
n
Do not overfill the media cassette. The cassette has a fill-limit
mark on the inside left side.
n
If you have problems with double feeding, remove the media from
the cassette and fan the sheets. They may be sticking together.
»
Note:
Do not fan transparencies since this causes static.
n
Store media in a dry location away from moisture and humidity.
Summary of Contents for MAGICOLOR 2
