F3 COMPACT Service Manual
_______________________________________________________________________________________________________________________
51
3.8.1
Battery Lid Replacement
a.
Open the detector body as described in Section
3.1 - Opening the Detector Body
. Once
completed:
Note
The battery lid can be replaced without opening the detector body if the tether is unscrewed from
the battery lid.
•
Check the battery lid has an O-ring correctly in place. The O-ring must be clean and can
be lightly greased.
•
Check the battery lid closes onto the battery compartment. Fit and close the battery lid.
b.
Close the detector body as described in Section
3.2 - Closing the Detector Body
.
3.8.2
Battery Compartment Replacement
a.
Open the detector body as described in Section
3.1 - Opening the Detector Body
. Once
completed:
•
Disconnect the battery connector.
•
Remove the two screws (12mm) from the battery compartment.
•
Slide the battery compartment rearward (away from the main PCB), threading the
battery connector out of the detector body.
Figure 89: Opened Detector Body
Battery Connector
Figure 90: Replacing Battery Compartment
