F3 COMPACT Service Manual
_______________________________________________________________________________________________________________________
21
•
Identify the four Torx screws and check they all have O-rings fitted. Insert the four Torx
screws into the right side of the detector. The Torx screw positions have a Torx symbol
next to their screw holes. Insert the three long screws first.
•
Check the detector assembly and test all moving parts.
•
Place the detector on its right side. Remove the hinge cover then insert and tighten the
two screws (35mm) into the shaft hinge.
Figure 25: Fitting Screws into the Shaft Hinge
Figure 23: Fitting Four Screws
Torx Screw symbol
marks location of
all Torx Screws
O-ring
Figure 24: Fitting Torx Screws.
