F3 COMPACT Service Manual
_______________________________________________________________________________________________________________________
34
•
Insert a flat tip screwdriver into the slot underneath the cap shaft and lift and remove the
cap shaft.
•
Slide the coil out and off the lower shaft, exposing the coil cable.
•
Push the coil cable connector into the shaft hinge whilst gently pulling the coil cable out
of the end of the lower shaft. Once the coil connector has passed through the shaft hinge
it should slide out easily from the shafts.
Do not force the coil cable or coil connector.
b.
The coil can now be removed or replaced as required. To fit the coil to the detector refer
to section
3.4.6 - Fitting the Coil
.
3.4.3
Coil Pivot.
a.
The coil pivot is a line replaceable unit and Figure 55 illustrates the major parts. Each part
of the coil pivot can be ordered individually or as a 3004-0045 Coil Pivot Kit which includes all
parts shown in Table 3.
Figure 53: Sliding the Coil Off the Shaft
Figure 54: Coil Assembly
Figure 55: Coil Pivot Kit Parts
4003-0123
4311-0074
30-29011-514
4308-0030
4003-0116
0703-0204
4311-0086
4003-0121
