F3 COMPACT Service Manual
_______________________________________________________________________________________________________________________
47
3.6.1
Removing the Handle
a.
The detector body must first be opened to remove the handle as described in Section
3.1 - Opening the Detector Body
. Once completed:
•
Disconnect the wiring loom handle. Hold one side of the connector firm against the
detector body whilst gently pulling the other side.
•
Disconnect the spring latch hinge from the latch hinge.
•
Lift the handle off the pin handle pivot.
•
Remove the rod handle slide from the handle.
•
Pass the wiring loom handle through the top of the detector.
Pin Handle Pivot
Spring Latch Hinge
Latch Hinge
Handle
Rod Handle slide
Figure 81: Handle
Figure 82: Removing Handle and Cable
Pin Handle Pivot
Figure 80: Disconnect Wiring Loom Handle
