F3 COMPACT Service Manual
_______________________________________________________________________________________________________________________
37
•
Identify the section of coil cable closest to the coil and wind or unwind the coil cable to
achieve five turns. The five turns of cable will be located within the pivot with the pin coil
pivot passing through the centre.
•
Feed the pivot coil yoke onto the coil cable and carefully move the pivot coil yoke along
the coil cable to the coil. Align and then push the pivot coil yoke into place on the coil.
Check the pivot coil yoke rotates through 90 deg with end stops.
•
Feed the pivot shaft onto the coil cable. Align the coil cable with the five turns of cable
inside the pivot then press the pivot shaft onto the pivot coil yoke. Ensure the coil cable
retains the five turns of cable within the pivot.
O-Ring
5 Coils inside
Pivot
Figure 60: O-Ring and Coil Cable
Figure 61: Fitting Pivot Coil Yoke
Figure 62: Fitting Pivot Lower Shaft
