Mindray iMEC8 Vet, Operator'S Manual

Page: 40 / 202

4-2
4.2 Quick Admitting a Patient
Use [
Quick Admit
] only if you do not have the time or information to fully admit a patient. Complete the rest of the
patient demographic details later. Otherwise, the symbol will always be displayed in the patient information area.
1. Select the [ Patient Setup ] QuickKey, or [ Main Menu]
→
[ Patient Setup >> ].
2. Select [ Quick Admit ]. If a patient has been admitted at present, select [ Ok ] to discharge the current patient. If no
patient is admitted, you can choose either:

[
Yes
] to apply the data in your monitor to the new patient, or

[
No
] to clear any previous patient data
.
3. Enter the patient category and paced status for the new patient, and then select [
Ok
].
4.3 Querying and Obtaining Patient Information
The monitor can obtain patient information from HIS through eGateway. To query or obtain patient information from
HIS,
1. Select [
Main Menu]
→
[
Maintenance >>
]
→
[
User Maintenance >>
]
→
enter the required password
→
[
Gateway
Comm Setting >> ], and set [ IP Address ] and [ Port ]. Set [ ADT Query ] to [ On ].
2. Click the patient information area to enter the [ Patient Demographics ] menu.
3. Select [ Obtain Patient Info. >> ] to enter the [ Obtain Patient Information ] menu.
4. Input the query condition and then select [ Query ]. The monitor will display the obtained patient information.
5. Select a patient and then click [
Import
]. The monitor will update the information of the corresponding patient.
6. Select to exit the [ Obtain Patient Information ] menu.
NOTE

The option [Obtain Patient Information] is available in the [Patient Setup] menu only when [ADT Query] is
set to [On].

When obtaining patient information from HIS, the monitor will only update patient information. The
patient’s monitoring data is not changed and the patient is not discharged.