Mindray iMEC8 Vet, Operator'S Manual

Page: 177 / 202

C-1
C
Default Configurations
This chapter lists some of the most important factory default settings in configuration management. You cannot change
the factory default configuration itself. However, you can make changes to the settings from the factory default
configuration and then save the changed configuration as a user configuration. The last column of the following tables is
for your notes and review.
Note: In this chapter, O.M means the monitor’s operating mode. Column C refers to the settings that can be changed in
configuration management. Column M refers to the settings that can be changed in monitoring mode.
C.1 Parameters Configuration
C.1.1 ECG
ECG Setup
Item Name
O.M
General User Defaults
C M
Lead Set * * Auto
Alm Source * * HR
Alarm * * On
Alm Lev * * Med
HR/PR High * * 200
HR/PR Low * * 100
Sweep * * 25 mm/s
Beat Vol * * 2
Paced * No
Notch Filter * * Weak
Gain * * X1
Filter * * Monitor
ECG Display * * Normal
ST Analysis
Item Name
O.M
General User Defaults
C M
ST Analysis * * Off
Alarm * * Off
Alm Lev * * Med
ST-X High * * when ST Unit is mV:
when ST Unit is mm: 0.20
2.0
ST-X Low * * when ST Unit is mV:
when ST Unit is mm: -0.20
-2.0