Mindray DPM 1 Operator'S Manual Download Page 3

Page: 3 / 54

Intellectual Property Statement

Mindray DS USA, Inc. (hereinafter called Mindray DS) owns the intellectual property

rights to this product and this manual. This manual may refer to information protected by

copyrights or patents and does not convey any license under the copyright and the patent

rights of Mindray DS, nor the rights of others.

Mindray DS intends to maintain the contents of this manual as confidential information.

Disclosure of the information in this manual in any manner whatsoever without the written

permission of Mindray DS is strictly forbidden. Release, amendment, reproduction,

distribution, rental, adaption and translation of this manual in any manner whatsoever

without the written permission of Mindray DS is strictly forbidden.

is a trademark or a registered trademark of Shenzhen Mindray

Bio-Medical Electronics Co., Ltd. All third-party trademarks that appear in this manual are

used solely for editorial purposes and are the property of their respective owners.

Contents of this manual are subject to changes without prior notice.

WARNING

Federal Law (USA) restricts this device to sale by or on the order of a physician.

Summary of Contents for DPM 1























































Search results

Summary of Contents for DPM 1

Reviews:

Related manuals for DPM 1

Brands by name

Popular brands

Mindray DPM 1, Operator'S Manual

Search results

Summary of Contents for DPM 1

Reviews:

Related manuals for DPM 1

Brands by name

Popular brands