Mindray DPM 1, Operator'S Manual

Page: 13 / 54

2-1
2
General
2.1 Introduction
DPM1 Pulse Oximeter is a non-invasive, spot-check, oxygen saturation and pulse rate
monitor. It operates only on battery power using specified sensors labeled for patients
ranging from neonates to adults.
Parameters measured by DPM1 include: arterial oxygen saturation (SpO
2
), pulse rate (PR)
and pulse strength. DPM1 measures these parameters through a SpO
2
sensor and displays
them on the LCD screen after certain further processing.
DPM1 is operated and controlled by three buttons, which are Power button, Backlight
button and Confirm ID button. DPM1 is also capable of managing measured data and
transmitting the patient’s trend through the dual-purpose socket to a PC for printing.
2.2 Contraindications
None
2.3 Functions
DPM1 has the following functions:
„
Measuring: SpO2, PR and pulse strength.
„
Prompting: Memory full, ID full, low battery, standby, and technical error etc.
„
Power managing: automatic standby, automatic shutdown.
„
Data Managing: data storage, data protection, data deletion.
„
Data Printing: patient information and trend data.
For the data printing function, you must install the Pulse Oximeter management system in a
PC equipped with a printer, and connect DPM1 with the PC by a communication cable. For
details, please refer to the 7Pulse Oximeter Management System