Mindray DPM 1, Operator'S Manual

Page: 18 / 54

3-2
CAUTION
z
To dispose of the batteries, follow local laws for proper disposal.
z
Use AA alkaline batteries or rechargeable batteries. Do not use carbon or poor
quality batteries. Remove the batteries if the device is not to be used for a long
time.
z
During use, replace batteries of insufficient energy in time with good ones;
abnormal power supply may lead to product damages or even personnel injuries.
z
Only the operator can remove the battery cover.
3.3 Power-on
Press the Power button to turn on DPM1. The startup interfaces and version information
will be displayed, and then the initialization interface of DPM1 as shown in Figure 3-3 will
be displayed. After that, DPM1 will automatically switch to the standby mode as shown in
Figure 3-4.
Figure 3-3 Figure 3-4
3.4 Connect SpO
2
Sensor
As show below, you can connect the SpO
2
sensor to DPM1 by simply inserting the sensor’s
connector to DPM1’s dual-purpose socket.
Figure 3-5 Connect SpO2 sensor